15cm×15cm 磁悬挂天平系统(MSBS)的电磁场分析与计算

本文采用二维电磁场有限元法及磁路的简化计算法对15cm×15cm磁悬挂天平系统（MSBS）的阻力线圈间距、磁场的分布情况进行了分析计算,并与测试结果进行了分析比较,给出了15cm×15cm磁悬挂天平系统（MSBS）的结构方案。     

An FPTAS for scheduling a two‐machine flowshop with one unavailability interval

We study a deterministic two‐machine flowshop scheduling problem with an assumption that one of the two machines is not available in a specified time period. This period can be due to a breakdown, preventive maintenance, or processing unfinished jobs from a previous planning horizon. The problem is known to be NP‐hard. Pseudopolynomial dynamic programming algorithms and heuristics with worst case error bounds are given in the literature to solve the problem. They are different for the cases when the unavailability interval is for the first or second machine. The existence of a fully polynomial time approximation scheme (FPTAS) was formulated as an open conjecture in the literature. In this paper, we show that the two cases of the problem under study are equivalent to similar partition type problems. Then we derive a generic FPTAS for the latter problems with O(n⁵/ε⁴) time complexity. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

Proactive release procedures for just‐in‐time job shop environments,subject to machine failures

In this paper, we consider just‐in‐time job shop environments (job shop problems with an objective of minimizing the sum of tardiness and inventory costs), subject to uncertainty due to machine failures. We present techniques for proactive uncertainty management that exploit prior knowledge of uncertainty to build competitive release dates, whose execution improves performance. These techniques determine the release dates of different jobs based on measures of shop load, statistical data of machine failures, and repairs with a tradeoff between inventory and tardiness costs. Empirical results show that our methodology is very promising in comparison with simulated annealing and the best of 39 combinations of dispatch rules & release policies, under different frequencies of breakdowns. We observe that the performance of the proactive technique compared to the other two approaches improves in schedule quality (maximizing delivery performance while minimizing costs) with increase in frequency of breakdowns. The proactive technique presented here is also computationally less expensive than the other two approaches. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

大功率船用减速器斜齿圆柱齿轮啮合仿真模型

利用大型有限元分析软件MSC.Marc的直接约束法,建立了某大功率船用减速器斜齿圆柱齿轮副多齿啮合的三维有限元非线性接触分析模型。基于该模型,对齿轮副进行了一个啮合周期内的准静态啮合仿真分析。计算表明,本文得到的结果非常符合实际啮合规律,也验证了模型的正确性。由于模型的特点,有望进一步应用于齿轮的动态啮合分析。     

用混合有限元模型分析船体振动问题研究

对混合有限元模型应用于船体振动分析的方法进行了讨论,并建立了某船的混合有限元模型,分别对其船体总振动和局部振动进行了计算.计算结果表明,混合有限元模型的总振动计算结果略小于迁移矩阵法,而局部振动计算结果与孤立模型存在较大差异.     

内可逆闭式中冷回热布雷顿循环功率效率特性

应用有限时间热力学的方法分析了恒温热源条件下内可逆闭式中冷回热布雷顿循环的无因次功率和效率特性,导出了无因次功率及效率的解析式,通过数值计算,得到了分别对应于循环功率和效率的最佳中间压比分配,并研究了中冷度、回热度以及高低温侧换热器有致度对循环性能的影响。     

基于排队论的油料供给最优化分析

通过有限源排队系统的理论,分析油料供给工作中在满足一定的可靠性要求下的最优设计与最优分配问题,同时结合计算机技术,提出了求数值解的方法。     

基于Nastran优化的某导弹结构模型修正

为了对某型号导弹结构建立合理的有限元全弹模型,基于Nastran的灵敏度分析及优化功能,首先对初始导弹模型设计参数进行了灵敏度分析,并确定优化设计的设计变量,然后以模态试验结果为优化目标,对其进行动力学优化,得到修正模型.结果表明,修正后模型的计算结果与试验结果偏差有很大程度的改进,符合了工程的使用需要.     

有初始间隙弹性摩擦接触问题的罚有限元法

针对三维有初始间隙带摩擦的弹性接触问题,提出了一种新的迭代求解方法——罚有限元法。根据接触问题局部非线性的特点,将接触区域的法向非嵌入条件及切向连续性条件作为罚因子引入系统的总势能泛函中,由最小势能原理,得出了求解有初始间隙带摩擦弹性接触问题的罚有限元公式系统。最后通过两个数值算例验证方法的正确性和有效性。     

基于遗传算法与支持向量机的火炮内膛疵病分类方法研究

支持向量机能够较好解决小样本、非线性数据特征的多分类问题,适用于火炮内膛疵病的分类,但其性能依赖于其参数的选取;对基本遗传算法进行改进,使用自适应的交叉算子和变异算子,并应用于支持向量机参数优化;通过对火炮内膛疵病分类精度的对比研究,改进的遗传算法确定支持向量机优化参数的方法取得了良好的效果,验证了该方法对疵病分类的有效性。